SCSI QIC Tape Drive Emulator to PCMCIA/ CF (QIC Tape Drive Emulation)

tapedrive-lrgDescription

The SCSI QIC tape emulator allows CF Cards up to 16GB to attach to the SCSI bus. It is seen as a SCSI QIC 1/4″ tape drive by the host computer. The SCSI Tape emulator can operate with many other SCSI QIC 1/4″ tape drives and can be programmed to suit the host systems requirement.

CF card is seen as a SCSI QIC Tape Drive Emulator to the Host
Compact Flash card, which will be seen as a regular SCSI QIC tape drive on the Host’s SCSI bus

example2

Features

  • Small format PCB converts Compact Flash Media to appear as a SCSI QIC 1/4″ tape drive on a Host’s SCSI bus
  • 3.5″ form factor PCB which will replace any 3.5″ or 5″ SCSI QIC 1/4″ tape drive
  • Will fit in a 3.5″ disk slot using the same mountings
  • SCSI Host will typically see the device as a QIC 1/4″ tape drive of any emulation
  • Board is low power, using 5V only, and has an optional add-on display and pushbutton user interface
  • Microcode is field upgradable via integral serial port
  • Optional integration support available if required

Specifications

Garson Industries
Contact Info

Physical Address:
13402 Portal
Tustin, CA 92782

Email:

Office Phone:
(714) 651-8770